zonte metals

Flynn, it bewilders me why you spend so much time being negative on a stock you don't own, it is very obvious you hold some kind of grudge.

You complain when the company does not provide updated info and complain when they do. Zonte cannot control what the Yukon government does or Colombia courts, they simply at the mercy of waiting. To make any prediction on what they will do is just like putting your foot in your mouth

I think it is quite logical if a company needs to raise cash they will make sure the presentation and website is up to speed. Pretty basic 101 management.

What stocks do you own? Never see any positive comments on them.

I guess some people are just naturally negative? Good luck with your investments.

Oh, are you a leaf fan?

What the fact sheet/Presentation does not mention. Is any on going progress. No mention at all about the 8 month wait for Yukon permits,
no mention on a court date.

Power Point presentation pretty basic PDF skills. ITs the same information that's been around for a while, I guess they have nothing else to do, since they have to raise cash soon.

Thanks Goldman, I had a look at the new presentation, quite good and an improvement. Here is a good slide that highlights Cross Hills

Congratulations to Terry Christopher for doing an excellent update to the Zonte Metals website when the April 28, 2022 Press Release was issued .
Below are the written descriptions that was just provided for """ CROSS HILLS COPPER PROPERTY ".

For the very important images , go to the website and click the Project Title and then open the Cross Hills Project to view the images .

"""" As well , Zonte shareholders should carefully the new 29 page presentation which has been substantially modified . The presentation focuses on copper , copper and more copper at Cross Hills . """""





‍
CROSS HILLS COPPER PROPERTY
Newfoundland
The Cross Hills Copper Project is an Iron Oxide Copper Gold (IOCG)system covering 25 km length of the deep seated Cross Hills Fault, along which significant alteration and mineralization has been discovered. The Company has been working the project since 2018 and has taken the project from having just several mineral showings to one with 9 targets. Drilling has demonstrated the system is fertile with copper and with the 9 targets discovered to date, provides the Company with an attractive risk/reward scenario.

The Project has excellent accessibility with a network of roads and atv trails. It can be worked all year round. The project is also located close to power, with a new powerline, supplied by hydro electric energy, sitting at the northern boundary of the project.

The targets discovered to date

The adjacent image illustrates the different magnetic anomalies idenified on the property. The image combines both airborne and ground surveys.

The anomalies are defined by a combination of geology, alteration and mineralization.

Most of the exploration to date has focused on the the Dunns Mountain Target. The Company has completed detailed magnetic and gravity surveys over the target. Drilling to date, has intercepted low and high grade mineralization. The best mineralized drill core has been located on the eastern flank of the gravity and magnetic anomalies. Drilling has encountered widely spaced hairline fractures containing copper mineralization as well as narrow high-grade copper, silver and gold. Drilling has confirm the Cross Hills system is fertile with copper.

The Dunns Mountain Target

The image below illustrates combined magnetic (colour) and gravity (contours) over Dunns Mtn target. The dashed area is where the best mineralization to date has been discovered, which sits on the eastern flank of the gravity and magnetic signatures. Additional work to the north, west and south of the drilled area is needed at Dunns.

The high-grade interval was intersected in CH-19-04 wherein 0.43mreturned 14% Cu, 15.8 g/t Au and 352 g/t Ag. This mineralization sits in a wider zone and the drill hole intersected a number of other mineralized intervals. See the table at the website .


Note, the true width of the zone has not been determined. Bo = bornite, cc = chalcocite, cpy = chalcopyrite, mal = malacite, az = azurite and mag = magnetite.


The high-grade zone has not yet been explained. In Canada’s artic, two IOCG deposits are associated with these types of high-grad pods. At the Sue Dianne deposit, these high-grade pods can be found within several hundred metres of the ore body, while at the NICO deposit these high-grade pods can be up to several kilometres away. Of note, about 1 km south of Dunns Mountain is the Big K target and to the north about 1.5 km is the N Dunns target.

To the south of CH-19-04 and sitting on the flank of the magnetic and gravity anomaly, two drill holes intersected intervals containing widely spaced mineralized hairline fractures. Intervals showing this character ranged from40m to 100m in width. Many times mineralized hairline fractures can be peripheral to IOCG deposits.

The Big K Target

To the south of Dunns Mountain is the Big K Target (Adjacent Image) It is defined by coincident gravity and magnetic anomalies with a copper-in-soil anomaly. Recent exploration through the area where the copper soil anomaly is located discovered bed rock copper mineralization. This target is drill ready.

The K6 Target

Further south the K6 target is drill ready. This target was drilled back n 2019 where two drill holes targeted the highest magnetic and gravity portions of the target. Drilling interested trace copper mineralization. Subsequent to the drill program a soil program was carried out and a new target area was discovered about 100m to the south the of the previous drilling. The area is defined by moderated magnetic and gravity signatures, copper-in-soil anomaly and bedrock copper mineralization.

‍Targets being worked to drill stage.

The remaining targets are being worked to the drill stage. Of those two newly discovered targets are large and on the order of 3 by 3 km. These included the N Dunns and Nine Mile targets. Both targets were discovered from an airborne magnetic survey. Since that time, a widely spaced soil program has been completed on both, with copper anomalies becoming apparent. Additional sampling and a gravity survey is needed.


The N Dunns Target

‍

This target is the second largest discovered on the property to date, measuring 3 by 2 km.

‍

An initial soil sampling program has identified areas with copper in soils and additional infill sampling is required. The target is generally covered, however, two copper showings were located on the northern edge of the anomaly.


The Nine Mile target

‍

It's the largest discovered on the project to date, measuring 4 by 2.5 km. .

Prospecting has discovered disseminated copper mineralization on a number of areas of the property, which is denoted on the following image. Soil sampling program has identified a number of copper anomalies that require additional work.

The target also sits in a complex structural zone which could have aided in fluid movement providing conduits for mineralization.

The target requires additional surface work and a 3D gravity survey to help define areas to drill in a first pass drill program.

The K8 - K9 - K10 target area.

A newly developing area is the K8-K9-K10 target area. These three targets are located in close proximity to each other, with copper in bed rock and soils. Additional magnetics and gravity and geochemical analysis is needed and ongoing to help define drill targets.

‍

This area shows in increase in both iron oxide phases and significant increase in sulphpide content. Mineralization in these targets is generally characterized by chalcopyrite with lesser amounts of bornite and chalcocite. Each of the targets is haloed by a pyrite zone.

‍Exploration continues on the project to identify additional targets.

Trend.?
Zonte has preform terribly for years, they have never been connect to any market trends.

Flynn, I agree but you are describing an industry wide problem. At least it did not go down on news.

Mammoth put out good drill results yesterday, there was just 10 trades and the stock was down.

Greenbriar announces a $195 million project financing and the stock trades just 35,000 shares

Sixwave puts out a nice press releases and the stock goes to record lows.


This market sucks big time - plain and simple. This trend is not your friend

No one will be able to sell Zonte shares, there has been no buyers.
Just look at the volume today, after a news release.

there is zero interest here.

Should have done the same thing and sold half of my MINE, guess Zonte is waiting for the announcement of the trial date for the share price to go up before doing a private placement,the trial date better come soon,we need a serious drill program this year.

I don't think he said dump, but will probably take profits or part profits sooner. He has also been mentioning about trading more, so perhaps take profits and buy back if a stock falls back. I do this a lot. Hold a core position and also have a trade position.

Here is depth, looks fairly even

Any catch the comment in the Zonte paragraph that RonS will be dumping junior stocks once/if they rebound.
Finally about time the first mention on dumping this flattened stock.
The exit door will be full.

Looks like these new targets are the best chance yet for a discovery.

On long waits for assays, I saw this from Vulcan in NFLD

ST. JOHN'S, Newfoundland, April 27, 2022 (GLOBE NEWSWIRE) -- Vulcan Minerals Inc. ("the Company" - "Vulcan" TSX-V: VUL), provides the following exploration update.

Colchester Springdale Drilling Update

The Company is still waiting for drill assay results. A total of 1511 meters were drilled over 8 scout holes in late 2021 testing a variety of targets within mafic volcanic sequences at Colchester. Several stringer and disseminated sulfide zones were encountered containing chalcopyrite with variable associations of pyrite, pyrrhotite and sphalerite. The program was successful in intersecting copper sulphide zones visually similar to the stringer zones historically encountered in the Colchester area. A total of 621 samples were cut and submitted for assay. Backlogs in the laboratory are creating extraordinary delays in getting assay results. Results are expected in the next 2-3 weeks. They will be released after compilation and review.

New out this morning

HALIFAX, NS, April 28, 2022

TSXV: ZON

HALIFAX, NS, April 28, 2022 /CNW/ - Zonte Metals is pleased to provide the following update on the Cross Hills Copper Project, located in Newfoundland and Labrador, Canada.

The Company has discovered two copper-in-soil anomalies on the newly discovered K10 target. The K10 target was discovered during the Fall of 2021 and is characterized by bedrock copper mineralization in three separate surface zones (see January 26, 2022 press release). The three zones of surface mineralization lie within a 1600 by 1100m area and the limits of anomalies are obscured due to soil cover.

A reconnaissance soil program, composed of four widely spaced lines, was completed over the K10 target area through which two copper-in-soil anomalies were identified; one on each of the northern and southern portions of the target. The northern anomaly measures 800 by 400m and is open to the north and northwest. The southern anomaly measures 1000 by 550m and is open to the northwest. Both anomalies sit in and strike parallel to structural zones and are coincident with copper-in-bedrock mineralization. The K10, K9 and K8 targets are in close proximity and additional exploration will include magnetics and gravity surveying to vector towards and refine drill targets.

With the two new copper-in-soil anomalies at the K10 target, the Cross Hills Project now contains 10 targets over a 20km length. These targets have been identified over the last three years through systematic and detailed exploration. Prior drill results at Dunns Mountain by the Company indicate a fertile copper system, making each target a high-priority for drilling. The targets range from drill ready to recently discovered. With these 10 targets the Company will be entering a multi-phase testing program to drill the targets presently drill ready, while advancing other suitable targets to the drill stage for testing. Property wide exploration will continue for additional targets.

Maps illustrating the targets throughout the project, including the new copper-in-soil anomalies can be found at the following link www.zontemetals.com/projects/cross-hills-copper-property .