Zonte Video - February 19, 2024

Zonte Aug. 10, 2023 Video

Performance 2009 to 2023 (compound annual)

performance2009 2023Small

 

New subscribers, setup your Login ( Menu-Login)

Subscriptions

zonte metals

More
6 years 6 months ago - 6 years 6 months ago #119047 by RonS
RonS replied the topic: zonte metals
Hi Flynn, basically I use 'strong buy' if I think the stock will move in the near term and 'buy' if I think there is more time to buy it. My feeling today was it would not move up much in the near term, but was surprised at the extent of the sell off.

Terry seemed in a good mood when I talked to him yesterday, I imagine a different story today
Last Edit: 6 years 6 months ago by RonS.

Please Log in or Create an account to join the conversation.

  • flynn
  • flynn's Avatar Topic Author
  • Offline
  • Platinum Member
  • Platinum Member
More
6 years 6 months ago #119046 by flynn
flynn replied the topic: zonte metals
huge volume today. How many of us got blind sided with this.
Ron, U mentioned that Terry was happy? Can you explain why?

Please Log in or Create an account to join the conversation.

  • flynn
  • flynn's Avatar Topic Author
  • Offline
  • Platinum Member
  • Platinum Member
More
6 years 6 months ago #119045 by flynn
flynn replied the topic: zonte metals
maybe I'm looking for signs right now, but I noticed today in your ZONTE letter u had it as a "BUY".
I do remember u had it as a "STRONG BUY (SB). did that change today?

Please Log in or Create an account to join the conversation.

More
6 years 6 months ago #119044 by ron
ron replied the topic: zonte metals
Ron,when you say,

There is a lot of news coming and I think soon.

what's your time frame of soon ?

btw,were you disappointed with today's news release,
the grades resemble those of VIT,but i was expecting
higher grades coming from ZON,specially with what they're finding on surface ?

Please Log in or Create an account to join the conversation.

More
6 years 6 months ago #119043 by RonS
RonS replied the topic: zonte metals
ron, yup would agree, probably trade and consolidate in low to mid 20s for a while. Short term traders/speculators get washed out.

Probably the most interesting this about the drilling is they hit where there was no surface showing. The Geos map the Pluton based what they see on surface, so they will end up redrawing those maps and make it larger. I will have to look at the drill maps in some more detail

Please Log in or Create an account to join the conversation.

More
6 years 6 months ago #119042 by RonS
RonS replied the topic: zonte metals
Gambler just finished a very good call on Cohbar, it will probably have another move up at some point, hope you made a good trade

Please Log in or Create an account to join the conversation.

More
6 years 6 months ago #119041 by Gambler
Gambler replied the topic: zonte metals
On a side note, Thanks RonS for the Cohbar tip today, up $3 hit 7.60

Please Log in or Create an account to join the conversation.

More
6 years 6 months ago #119040 by ron
ron replied the topic: zonte metals

GoldnBoy wrote: Ron, you commented in late September update the downside risk was low 20s, we hit that and traded some at 18 and 19 cents, so pretty close call there. Too bad we did not go to the up side but do you think we have seen all the down side now?


don't know what Ron will say,but i think that if the stock trades
around $0.25,it would make sense,until news from newfoundland or columbia.

Please Log in or Create an account to join the conversation.

More
6 years 6 months ago #119039 by GoldnBoy
GoldnBoy replied the topic: zonte metals
Ron, you commented in late September update the downside risk was low 20s, we hit that and traded some at 18 and 19 cents, so pretty close call there. Too bad we did not go to the up side but do you think we have seen all the down side now?

Please Log in or Create an account to join the conversation.

More
6 years 6 months ago #119038 by RonS
RonS replied the topic: zonte metals
Terry seemed really upbeat yesterday. There is a lot of news coming and I think soon. I would bet drills are turning on NFLD by year end. Hopefully news will give us a better idea on time frame

Please Log in or Create an account to join the conversation.

More
6 years 6 months ago #119037 by ron
ron replied the topic: zonte metals

RonS wrote: Another thing pointed out to me, if you look at the drill table, the best intersect of 1.13 g/t over 8.01 meters was at the bottom of the hole. They were just starting to get into better mineralization and ended the hole there. I wonder what numbers would come up if it was drilled another 50 or 100 meters??


what's the frame of mind of terry,news from columbia,
a possibility in the spring of 2018 ?

Please Log in or Create an account to join the conversation.

More
6 years 6 months ago #119036 by GoldnBoy
GoldnBoy replied the topic: zonte metals
Now a surge in buying, feel lucky got more under 20

Please Log in or Create an account to join the conversation.

Moderators: RonS
Time to create page: 0.251 seconds
© 2019 Playstocks.net. All Rights Reserved. Designed By JoomShaper